XTC

XTC Miscellaneous

 

  1. Where can I find a comparison chart on all the thin clients Bosanova sells?
  2. How do I install a Bluetooth device on the XP embedded thin client?
  3. How do I set up my XTC-1000 unit to use two monitors?
  4. How can I get BOSaNOVA TCP/IP to work with Real Vision software, particularly the scanning part?
  5. Using RDP I am getting a random Microsoft Licensing Error?
  6. I cannot VNC into the XTC thin client.
  7. Having trouble getting a dual monitor to work.
  8. How do I install a certificate on XP Embedded?
  9. How do I set the Ericom emulation to print to a local LPT attached printer?
  10. What is the XP All-In-One BIOS password?

     

Where can I find a comparison chart on all the thin clients Bosanova sells?
/thinclient/thinclientchart.html
Back to Top

How do I install a Bluetooth device on the XP embedded thin client?

When installing Bluetooth devices on xp embedded there are a list of steps that must be taken.

  1. Do not plug in the Bluetooth device.

  2. Install the wincomm drivers they are located in the product folder under Bluetooth – Winncomm
  3. After installing the drivers insert the Bluetooth device
  4. Update the driver for Generic  Bluetooth radio use the INF folder in the Bluetooth – Winncomm folder (ONLY FOR USB DEVICES) otherwise skip this step
  5. Right click on the Bluetooth icon in the system tray and start bluetooth
  6. Then walkthru the wizards (There is help files in the Bluetooth – Winncomm directory under user guides.  I suggest you review them
  7. Then connect the Bluetooth device
  8. If it is a WASP scan gun install the utility located in the Bluetooth – Winncomm folder
  9. Start that program up and connect to the appropriate com port.

 You must install the Bluetooth a certain way or it will not work.

Bluetooth Wireless Scanner.doc

Back to Top

How do I set up my XTC-1000 unit to use two monitors?

When trying to use a second monitor on a 1000 unit, the DVI connected one will be the primary and the VGA connected monitor will be the extended. A real DVI connection is needed to make this work, using a DVI to VGA converter will confuse the hardware and make it act though both are the VGA port and send the extended desktop to both monitors.

Back to Top

How can I get BOSaNOVA TCP/IP to work with Real Vision software, particularly the scanning part?

Go to Control Panel

Select System

Select Advanced

Select ENVIRONMENT VARIABLES

Highlight Path and select Edit

Go to the end of the variable value and after the ; add C:\PROGRA~1\BOS\BOSANO~1

Select OK

On the Real Vision software select bosanova under host hllapi

Back to Top

Using RDP I am getting a random Microsoft Licensing Error?

Edit the registry

Find the registry key under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSLicensing

Note: 

This works with local and domain admin only and not domain user.

Right click on MSLicensing and select Permissions

Select Advanced

Highlight Users(Local Computer Name) Select Edit

Make certain the permissions are set as below:

Right click on Hardware ID and select Permissions

Select Advanced

Highlight Users(Local Computer Name) and select Edit

Make certain the permissions are set as below:

Select OK all the way back to the registry key.

Right click on Store and select Permissions

Select Advanced

Highlight Users(Local Computer Name) and select Edit

Make certain the permissions are set as below:

Save all the way out, close registry editor and you should no longer get the error.

Back to Top

I cannot VNC into the XTC thin client.

Turn off prompt local user to accept incoming connections in VNC Server Properties (Service-Mode) and in VNC Server Properties (User-Mode).

Back to Top

Having trouble getting a dual monitor to work.

If you are using a VGA to DVI convertor it will not work; it needs to be true DVI monitor connection.

Back to Top

How do I install a certificate on XP Embedded?

See the attached word document for how to get this to work and the zipped file is the dll you will be missing.

creating crt extension to install certificate.doc

cryptext.zip

Back to Top

How do I set the Ericom emulation to print to a local LPT attached printer?

Once in the emulation go to the menu bar and select Terminal -> Setup Select the Printer tab and under Print Device select Device and under Device enter /dev/lp0.

Click OK and then when you select the Print Screen option it will print to the locally attached parallel printer.

Back to Top

What is the XP All-In-One BIOS password?

The all-in-one BIOS password is thinlabs

Back to Top