New Page 1

We have a standard 101 keyboard driver in the build and drivers for our 80 key keyboard. We currently do not support a keyboard with extra windows buttons - any other keyboard we would have to have the developer add it (for a charge).

Modify the Intel Profile under Add/Remove programs under Control Panel to Enable “Persistent Connection”.

The persistent connection feature allows for a Wireless LAN connection to the network to remain after a user logs off and also at boot time before the user has logged in. This feature allows for system maintenance of the machine by network administrators in a similar manner to that over a wired LAN connection.

Once it has been added, Open Intel utility, select administrator tools, it has a blank password, enter and check the box for “Persistent connection”.

Additional Information:

Is your tablet DT366LX XPE with 1GB Flash or higher?

Is your wireless adapter Intel Pro2200BG?

If you have the configuration above then you can follow the article on Intel site.

http://support.intel.com/support/wireless/wlan/sb/cs-022331.htm

and, this is the download link for the Intel software version 10.1.1

http://downloadfinder.intel.com/scripts-df-external/Detail_Desc.aspx?&DwnldID=9720&ProductID=2259

However, if you have 512MB Flash configuration you do not have enough space to install the Intel software, and you will need to upgrade your Flash storage size.

Connected a USB keyboard to the tablet but am getting a box up that says to enter name of drivers for USB device - where do I get those drivers and how do I install them?

Back to Top

How do I install a Bluetooth device?

Back to Top

Using the Intel ProSet Wireless card and software we are trying to log into a domain but the wireless card does not go active until you have logged in but you cannot log in without the wireless card being active.

Back to Top